Logged In as:Guest
Contact: inverted@blackdogrc.com
Home
What's new?
Feedback
Sign In
Cart
Search...
All Products
Clearance
Specials
Gallery
FREE
Policy
Shipping
About Us
paypal
Lipo Chargers, Balancers and Balance Port details

Index of Items on this page:

3ESMARTPLUSTo Top
3ESMARTPLUS
Price each: $39.00
Out Of Stock. Expected:within 30 Days
3E SmartPlus Charger A computer BALANCING charger that is very heavy duty. Case made from machined aluminum. Can charge :
  • ONE OR TWO two cell packss at the same time
  • ONE two and ONE three cell packs at the same time
  • ONE three cell pack
  • ONE four cell pack
  • ONE five cell pack
    Connects to any 12 volt source, has built in fan (the case acts as heat sink, will get warm.)
    Green/RED LEDS will indicate charging status.
    Specifications:
    ItemValue
    Battery:Li-ion and Lipoly
    Input Voltage:12-15volts
    Weight:400g (0.88lbs)
    Charging Current:1.3a constant @ 4.2v
    Size:140x80x31mm
     Warning: Ensure that you DO NOT charge any pack smaller than
    1300mah with this charger! It puts out 1300ma current. This would exceed the
    1C charge rate for smaller packs! A fire could result.
    • DNG2To Top
    DNG2
    Price each: $64.00
    Out Of Stock. Expected:On order
    a LCD DISPLAY shows your voltage and charging status PER CELL. How cool is that!! Chargers 2-4 cell packs in parallel. You can also select the charge rate up to 2 amps. AND, has a General charging port will allow you charge any lipo battery which has balancing leads.
      Product Features:
    • Input voltage: DC 11V~15V. The working electric current is less than 6A when it is charged in full load. The current of the fuse is 10A,which could prevent short circuit.
    • The charge current is 0.2A~2.0A and the adjusting step is 0.2A,which can be set by the buttons on the board.
    • Controlled by 4 separated internal micro computers. charge 1S-4S battery separately. no like other serial charging + balancer setup on the market. More efficient.
    • 4 separated JST style charging ports, one general charging port.
    • Big LCD display. real-time displays voltage and charging processing clearly and separately.
    • Low voltage protection. charger won't charge any cell if voltage is lower than 2.7v.
    • Automatically stop charging when it's done. A buzzer will call.
    • 4 separated parallel charging circuits ensure your battery 100% fully charged. Higher efficiency.
    • Charge mode of the balanced parallel connection
    • charge in parallel connection for one single cell or four single cells at one time
    • charge in parallel connection for a pile of two series-wound lithium cells or two piles of two series-wound lithium cells at one time
    • charge in parallel connection for a pile of three series-wound lithium cells or one single lithium cell at one time
    • charge in parallel connection for a pile of four series-wound lithium cells
    • Working rating: -20 ~ 60 C
    • Fully circuit protection: protect the charger and battery even when connect the battery or the power supply reversely.
    • General charging port will allow you charge any lipo battery which has balancing leads. Warning: Ensure that you CAREFULLY CHOOSE THE charge RATE!
      IF YOU Exceed 1c charge rate for you battery, it likly will be ruined and start on fire.
      THIS IS exceptionally important on small batteries, like the 450, 650s, sizes.
    DYANSUPERMATE4To Top
    DYANSUPERMATE4
    Price each: $35.00
    Add To Cart
    Dynam Supermate 4 Balancer Charger:
    Charge and BALANCE
    • TWO 2 cell packs at the same time
    • ONE 3 cell pack only
    • ONE 4 cell pack only
      1 amp charging rate.
      This charger will balance AND charge at the same time. IF you leave your packs connected to the charger, it will re-charge them after the cells drop a few tenths of a volt.
      Click here for the manual
      Click the icon for a large view AND a view of the charge connectors. They fit the BlackDogRC balance Port connectors.
      Warning: Ensure that you DO NOT charge any pack smaller than
      1000mah with this charger! It puts out 1000ma current. This would exceed the
      1C charge rate for smaller packs! A fire could result.
    APACHE505To Top
    APACHE505
    Price each: $25.00
    Out Of Stock. Expected:within 30 Days
    Apache 505 Balancer:
    Summary Detail Pin-outs
    2,3,4 or 5 cell balancer. Standalone OR use with the charger.
    Has Adapters to fit PolyQuest, Hyperion and E-Tec packs. They do not fit Thunder Power.
    Free adapter plug for BlackDogRC packs 3 cell packs included. Please inquire.
    This balancer will balance each and every cell in the pack, from 2 to 5 cells.
    When you plug in a pack, the leds glow green or red for each cell in the pack. If out of balance, the cell led glows red.
    The balancer will work with a lipo safe charger OR you can balance stand-alone.
    It seems every pack on the market has a different balancer port. This is very frustrating to everyone. The 505 has adapters to fit PolyQuest, Hyperion and E-Tec packs. They do not fit Thunder Power.
    Free adapter plug for BlackDogRC 3 cell packs included. Instructions on how to wire the balancer plug on the next tab.
    We will gladly wire your BlackDogRC plug up by using one of the adapters in the 505 pack and attaching the BlackDogRC plug correctly to it, just ask.
    Additional adapters are on order.
    Click to see larger picture of the contents: Look at all those adapters!

    How to wire the Apache505 to the FREE battery balancer plugs:
    How to connect to the BlackDog WHITE 3 cell connectors:
  • Pin 1(left most side): Red = pack red(+)
  • Pin 2: unconnected
  • Pin 3: RED(+):
  • Pin 4: -3.7(neg)
  • Pin 5: -7.2 (neg)
  • Pin 6: -11.1(neg)

    • Below are detailed pictures of the balancer ports to help you determine if your balancer will fit or not!
    CAUTION: NOT all packs are wired identically. Don't connect a balancer unless you know the wiring! A positive to negative short may destroy the pack!

    Width of 3 cell balancer = 10.68mm.
    The balancer plug allows only one way insertion via plastic guides. They are 8.78mm apart.
    The pins are 2.16mm apart