|
|
Brushless Speed Controls
Very Economical, programmable speed controls
Index of Items on this page:
|
Castle creation's Thunderbird 09 (9 amp )brushless speed controller. The "Standard" in functionality and LIPO safe!
These controllers will drive ONE or TWO brushless motors with ease. (other speed controllers may not drive two motors).
| Cells w/BEC | 2s, 3s Lipo or 5-12 NiMH/NiCad |
| Continuous | 09 amps |
| Switching Rate | 13,000 hz |
| Brake | On/Off |
| Reversible | Yes - change any two wires |
| Low Voltage Cut-off | Auto lipo or NiMH/NiCad |
| Size | 1.32 x .33 x .90" |
| Weight | (w/wires) 8 grams with wires |
| Connector Type | Universal |
See the Thunderbird-09 User Guide (93k PDF) for more details.
|
|
|
Castle creation's Thunderbird 18 brushless speed controller. The "Standard" in functionality and LIPO safe!
These controllers will drive ONE or TWO brushless motors with ease. (other speed controllers may not drive two motors).
| Cells w/BEC | 2s, 3s Lipo or 5-12 NiMH/NiCad |
| Continuous | 18 amps |
| Switching Rate | 13,000 hz |
| Brake | On/Off |
| Reversible | Yes - change any two wires |
| Low Voltage Cut-off | Auto lipo or NiMH/NiCad |
| Size | 1.32 x .33 x .90" |
| Weight | (w/wires) .6 oz (17g) |
| Connector Type | Universal |
See the Thunderbird-18 User Guide (93k PDF) for more details.
|
|
|
Castle creation's Thunderbird 36 brushless speed controller. The "Standard" in functionality and LIPO safe!
These controllers will drive ONE or TWO brushless motors with ease. (other speed controllers may not drive two motors).
| Cells w/BEC | 2s, 3s Lipo or 5-12 NiMH/NiCad |
| Continuous | 36 amps |
| Switching Rate | 13,000 hz |
| Brake | On/Off |
| Reversible | Yes - change any two wires |
| Low Voltage Cut-off | Auto lipo or NiMH/NiCad |
| Size | 1.6 x 1 x .33 inches |
| Weight | (w/wires) .6 oz (20g) |
| Connector Type | Universal |
| BEC: | 3amps |
See the Thunderbird-18 User Guide (93k PDF) for more details.
|
|
|
Castle creation's Thunderbird 54 brushless speed controller. The "Standard" in functionality and LIPO safe!
These controllers will drive ONE or TWO brushless motors with ease. (other speed controllers may not drive two motors).
| Cells w/BEC | 2s, 3s Lipo or 5-12 NiMH/NiCad (15v max) |
| Continuous | 54 amps |
| Switching Rate | 13,000 hz |
| Brake | On/Off |
| Reversible | Yes - change any two wires |
| Low Voltage Cut-off | Auto lipo or NiMH/NiCad |
| Size | 2 x 1.15 x .04 inches |
| Weight | (w/wires) 1.2 oz (20g) |
| Connector Type | Universal |
| BEC: | 3amps |
See the Thunderbird-18 User Guide (93k PDF) for more details.
|
|
|
PHOENIX80
Castle Creations Phoenix 80
Never has there been this much reliable power capability in such a compact package. The Phoenix-80's whopping 120 amp surge rating puts it at the head of the field for LMR competition flying, F5D pylon racing, and large helicopters. With a super low 0.0012 ohms of resistance, the Phoenix-80 keeps it's cool under the most demanding conditions.
The Phoenix-80 comes with the full range of Phoenix programming options including adjustable switching rate, programmable brake and several timing modes for the ultimate in competition controllers.
| Volts w/BEC | 12.6 MAX |
| Volts NO BEC | 25.2 MAX See ELE 3A BEC |
| Lipo Cells w/BEC | 3S MAX |
| Lipo Cells NO BEC | 6S MAX |
| NiCad or NiMh Cells w/BEC | 12 MAX |
| NiCad or NiMh Cells NO BEC | 20 MAX |
| Continuous | 80 amps |
| Switching Rate | Programmable
(11, 22, or 41 khz) |
| Resistance | 0.001 ohms |
| Brake | Yes |
| Reversible | Yes - change any two wires |
| Low Voltage Cut-off | Programmable |
| Size | 1.05 x2.65 x.45" |
| Weight (w/wires) | 2.1 oz (60g) |
| Connector Type | Universal |
| ELEBEC | |
|  |
|
|
|
|
|
TowerPro 10Amp Magic8 speed control
New version of the Tower Pro 12a speed control.
Use to drive one brushless motor up to 10 amps continous.
|
Weight:
|
9 grams / 0.38 oz
|
|
Constant Current:
|
10A
|
|
Max Current:
|
12A (10 seconds)
|
|
FET:
|
6
|
|
BEC:
|
Yes, 1.5A
|
|
TIMING:
|
Auto
|
|
PWM:
|
8K
|
|
Input:
|
2/3 Li-Poly
|
Programmable 2-Cell/3-Cell Lipoly Cutoff
|
|
|
Dynam 18 amp Brushless Speed Control
18!AMP GENERATION 2 Brushless Programmable Speed Controller by Dynam
Use to drive one brushless motor up to 18 amps continous.
Does NOT support two motors. If you need to run twins with one controller, check out the Thunderbird 18
I switched suppliers, and now get the better controllers for a cheaper price!
I pass the savings on to you!
| Weight: | 21 g |
| Resitance: | 0.013 oHms
Use with Ni-Cd,Ni-Mh, Li-Ion, and Li-Poly batteries
| Throttle calibration | AUTO |
| Cell Detection: | AUTO CELL DETECT!!! |
| BEC | 2 Li-Poly=4 servos, 3 Li-Poly =3 servos |
| Switching: | 8kHz |
| Voltage cutoff: | Slow down system with safety at 2.75V/cell |
|
Product manual for Dynam Speed Controls.
|
|
|
40 amp Dynam Premium brushless control.
| Item | Value |
| Model: | Dynam 40 |
| Continuous Current: | 40Amp |
| Input Voltage: | Ni-Mh 6-12 cells
Lithium 2-3 cells |
| BEC Current: | 2A (max) |
| Weight: | 26g |
| PWM frequency: | 8KHZ |
| Brake: | Hard or Soft brake |
Main Functions
- Weight: 26 g
- Use with Ni-Cd,Ni-Mh, Li-Ion, and Li-Poly batteries
- Auto throttle calibration
- AUTO CELL DETECT!!!
- BEC 2 Li-Poly=4 servos, 3 Li-Poly =3 servos
- Hard or Soft brake
- Low VCutoff is set at 2.75V per cell
*Programmable via the Jeti program card to 3volts.
|
|
|
|
25 amp Dynam Premium brushless control.
| Item | Value |
| Model: | Dynam 25 |
| Continuous Current: | 25Amp |
| Input Voltage: | Ni-Mh 6-12 cells
Lithium 2-3 cells |
| BEC Current: | 2A (max) |
| Weight: | 21g |
| PWM frequency: | 8KHZ |
| Brake: | Hard or Soft brake |
Main Functions
- Weight: 21 g
- Use with Ni-Cd,Ni-Mh, Li-Ion, and Li-Poly batteries
- Auto throttle calibration
- AUTO CELL DETECT!!!
- BEC 2 Li-Poly=4 servos, 3 Li-Poly =3 servos
- Hard or Soft brake
- Low VCutoff is set at 2.75V per cell
*Programmable via the Jeti program card to 3volts.
|
|
|
|
|
30 amp Dynam Premium brushless control.
| Item | Value |
| Model: | Dynam 30 |
| Continuous Current: | 30Amp |
| Input Voltage: | Ni-Mh 6-12 cells
Lithium 2-3 cells |
| BEC Current: | 2A (max) |
| Weight: | 26g |
| PWM frequency: | 8KHZ |
| Brake: | Hard or Soft brake |
Main Functions
- Weight: 26 g
- Use with Ni-Cd,Ni-Mh, Li-Ion, and Li-Poly batteries
- Auto throttle calibration
- AUTO CELL DETECT!!!
- BEC 2 Li-Poly=4 servos, 3 Li-Poly =3 servos
- Hard or Soft brake
- Low VCutoff is set at 2.75V per cell
*Programmable via the Jeti program card to 3volts.
|
|
|
|
|
DYNAM60
60amp Dynam Premium OPTO brushless control. For big models, need seperate BEC (battery eliminator circuit)
NO BEC. For BEC (battery eliminator circuits), check the accessories tab...
| Item | Value |
| Model: | Dynam 60 |
| Continuous Current: | 60Amp |
| Input Voltage: | Ni-Mh 6-16 cells
Lithium 2-6 cells |
| BEC Current: | ZERO (max) |
| Weight: | 27g |
| PWM frequency: | 8KHZ |
| Brake: | Hard or Soft brake |
| |
Main Functions
- Weight: 33g
- Use with Ni-Cd,Ni-Mh, Li-Ion, and Li-Poly batteries
- Auto throttle calibration
- AUTO CELL DETECT!!!
- BEC ZERO, need seperate UBEC to drive receiver/servos.
- Hard or Soft brake
- Low VCutoff is set at 2.75V per cell
*Programmable via the Jeti program card to 3volts.
Product manual for Dynam Speed Controls.
|
| DYNAMBEC | |
|  |
| | ELEBEC | |
| |
|
|
|
|
|
|
DYANM70
70amp Dynam Premium OPTO brushless control. For big models, need seperate BEC (battery eliminator circuit)
NO BEC. For BEC (battery eliminator circuits), check the accessories tab...
| Item | Value |
| Model: | Dynam 70 |
| Continuous Current: | 70Amp |
| Input Voltage: | Ni-Mh 6-16 cells
Lithium 2-6 cells |
| BEC Current: | ZERO (max) |
| Weight: | 27g |
| PWM frequency: | 8KHZ |
| Brake: | Hard or Soft brake |
| |
Main Functions
- Weight: 33g
- Use with Ni-Cd,Ni-Mh, Li-Ion, and Li-Poly batteries
- Auto throttle calibration
- AUTO CELL DETECT!!!
- BEC ZERO, need seperate UBEC to drive receiver/servos.
- Hard or Soft brake
- Low VCutoff is set at 2.75V per cell
*Programmable via the Jeti program card to 3volts.
Product manual for Dynam Speed Controls.
|
|
|
|
|
ELE80HV
ELE 80 amp speed control, opto isolated, no BEC.
Features AUTO LIPO Detection!
LIPO 2-5 cells
Programmable
| Model: | ELE advance-80
| Continuous Current: | 80A |
| Input Voltage: |
Ni-Mh 6-16 cells
Li-ion 2-5 cells
|
| BEC Current: | NONE. See ELE 3A BEC |
| Weight: | 55g |
Main Functions
Safety mode: the motor will not run no matter what position of the control stick is when the RC unit is switched on.
Break setting: on / off (factory setting is OFF)
Three point battery type and low voltage selection.
Software reversion of motor tuning direction
Low current protection: ignore/reduce/power/shut off
Temperature protection: reduce power when the temperature reaches 120 degrees C
PWM frequency: 8KHZ/16KHZ
RPM setting: 20K RPM / 50K RPM / 100K RPM
Features
User-friendly design. Easy to operate with music input notice.
Advanced and scientific circuit design, High interrupt resistance, use only high industrial quality components.
Temperature protection switch, will automatically reduce or shut off the current when the temperature is too high.
Dual PWM frequency control lead to smooth and stable control.
Strict quality control. All products were tested in 120% standard current and under high temperature 48 hours.
| ELEBEC | |
| |
|
|
|
|
|
GWS 15amp Brushless speed control.
Will drive two brushless motors.
|
Weight:
|
17 grams / 0.6 oz
|
|
Size:
|
50 x 25 x 11.5 mm / 2 x 1 x 0.45 in.
|
|
Current:
|
- Max. Current 22.5A when apply 7.4 Volts.
- Max. Current 15.0A when apply 11.1 Volts.
- Max. Current 10.0A when apply 14.8 Volts.
|
|
BEC:
|
Yes, 1.5A
|
|
TIMING:
|
Auto
|
|
Input:
|
2/3/4 Li-Poly
|
|
Low-Voltage Cutoff:
|
2 cell Li-Poly 6.2V, 3 cell Li-Poly 9.3V, 4 cell 12.4
|
|
|
|
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)